Home > Products
Share:

New Acasi Model FMF-6000 Flow Meter Filler

4669

One (1) New Acasi Model FMF-6000 Six (6) Nozzle Flow Meter Filler. This filler is capable filling from water-thin products to medium viscosity creams or sauces.

Main Component Features:

  • Hardened stainless steel calibrated shafts with linear bearings for nozzle rack movement smoothness and durability
  • 10-inch stroke air cylinder with magnetic sensors for nozzle up and down movement
  • Hand wheel and shaft mounted stoppers for height and stroke adjustment

 

Control Panel Features:

  • Individual volume adjustment for each flow-meter
  • Flow-meter on-off switch
  • Omron 5-inch touch screen for machine functions
  • Omron PLC for all machine logic functions, special modifications on programs available for special adaptations
  • Three filling options on control panel (up, bottom-up and down)
  • Bottle counter
  • Front panel start and emergency stop for easy access
  • Fiber optic sensors for container gating
  • No bottle-no fill, PLC controlled
  • Recipe memory minimizes changeover times

 Standard Features:

  • Nozzle spacing fully adjustable through top or bottom screw
  • Container height adjustment from 0.5 to 16 inches high
  • Nozzle stroke adjustments from 0 to 10 inches
  • Entry and exit bottle gating cylinders: adjustable sideways, up and down, and inside and outside
  • Will work with plastic or glass containers
  • No change parts needed for various types of containers
  • Air filter-regulator and safety lockout valve included
  • Spacing and additional bottle control obtained by flow controls mounted on air gating cylinders

 

Electric And Pneumatic Requirements:

  • 220 Volts, Single Phase, 60/50 Hz, 15 to 40 Amps (Depending on pump quantities).
  • 20 CFM @ 80 p.s.i.

Base Filler Price:

Coriolis Mass Flow Meter Price:

Drip free Nozzles (Standard length) From 1/4" To 3/4" $420ea  
Bottom-up nozzle – Pneumatic tip, drip free 1/4" to ¾" $550ea
Bottom-up nozzle – Pneumatic tip, drip free 1" to 1-1/4"  870ea
Short Nozzle Pneumatic tip, drip free Sizes:1", 1-1/4", 1-1/2" $670ea 
PLC Controlled Pneumatic S/S Drip Tray $1,220
PLC Controlled Pneumatic Centering Guide $1,880
Each Centering Guide $50
Probe For Low to High Viscosity Products $2,320
45 Gallon 304 S/S Pressurized (40PSI Max) Product Tank $9,010
Top mount 30 Gallon 304 S/S Pressurized (5PSI Max) Product Tank $3,520
10' X 4.5" Sanitary Conveyor Acetyl Chain With Speed Control Installed In Fillers Control Panel $4,770

 

Available
Qty: