One (1) *New* GlobePharma VersaPress® . This is a new table-top rotary tablet press, which can be supplied with either a 10, 15, or 18-station turret suitable for use with B tooling, and 10-station turret suitable for use with D tooling, or a turret with 7 stations for B tooling and 7 stations for D tooling. This unit is our highest compression rotary tablet press.
Machine Key Features
- ▪ AC drive with fixed pulley
- ▪ Keyed turret
- ▪ Variable speed force feeder
- ▪ Pre-compression
- ▪ GMP design
- ▪ 6 ton maximum compression pressure
- ▪ 2 ton pre-compression pressure
- ▪ One piece upper cam track
- ▪ Adjustable machine speed
- ▪ Hard heat treated rollers
- ▪ Turret fitted with thrust bearing
- ▪ Safety-interlocked acrylic guards
- ▪ Hand wheel with clutch and handle outside of machine
Contact Us For Pricing
|
VersaPress B-15 stations,Stainless Steel Turret, including both gravity feed frame, force feeder, two hoppers and two sets of cams |
|
|
VersaPress® D – 12 stations D, Stainless Steel Turret, including both gravity feed
frame, force feeder, hopper and two sets of cams. |
|
|
VersaPress BD – 7 stations B & 7 stations D, Stainless Steel Turret, including both gravity feed frame, force feeder, two hoppers and two sets of cams (B & D) |
|
|
IQ/OQ/PQ Protocol |
$3,175.00
|
|
VersaPress Platform -Custom-made heavy duty 304 stainless steel platform, 2500 lb
capacity, 36”W x 40”D x 16”H with casters (Recommended |
$6,375.00
|
|
Installation, Training & Equipment Qualification (Required): $2995 per 8-hour day
plus travel expenses. Travel time not included in daily rate. Travel time charged @
$65 per hour. |
$2,995.00 |
|
Crating Costs |
$750.00 |
Technical Specifications
| |
B Tooling |
|
D Tooling |
| Max tablet diameter |
16mm |
|
25.4mm |
| Max depth of fill |
17mm |
|
20.5mm |
| Max output |
16,700/hr |
|
16,700/hr |
| Max compression pressure |
|
5 tons |
|
| Max turret speed |
|
30rpm |
|
| Min turret speed |
|
4.5rpm |
|
| Max pre-compression pressure |
|
2 tons |
|
| Upper punch penetration |
|
6mm |
|
Electrical Specifications
Main Motor: 3HP (1.5kw), 1690 rpm, 220V/3 Phase/50/60 Hz or 220V/1 Phase/50/60Hz
Force Feeder Motor: 1/4 HP, 230V/1 Phase/50/60 Hz.